description 1w power led light source is a high performance energy efcient device which can handle high thermal and high driving current. the exposed pad design has excellent heat transfer from the package to the motherboard. the 1w power led light source is mounted on to metal core pcb enabling optimum heat dissipation and ease of installation. the low profle package design is suitable for a wide variety of applications especially where height is a con - straint. applications ? portable (fash light, bicycle head light) ? reading light ? architectural lighting ? garden lighting ? decorative lighting asmt-mxa0 moonstone tm 1w power led light source on mcpcb data sheet features ? available in red, amber, green, blue, cool white and warm white color. ? energy efcient ? high current operation. ? long operation life. ? wide viewing angle. ? silicone encapsulation specifcations ? allngap technology for red and amber ? ingan technology for green, blue, cool white & warm white color ? 2.4v, 350ma (typical) for alingap technology ? 3.6v, 350ma (typical) for ingan technology ? 110 viewing angle for white products ? 120 viewing angle for mono color products devicefselectionfguidefatfjunctionftemperatureft j f=f25 c f color f partfnumber luminousfflux,fvf [1,f2,f3] f(lm) testfcurrent (ma) dice technology min typ max red asmt-mra0-agh00 25.5 35.0 43.0 350 alingap red asmt-mra0-ahj00 33.0 40.0 56.0 350 alingap amber ASMT-MAA0-AGH00 25.5 35.0 43.0 350 alingap green asmt-mga0 43.0 60.0 73.0 350 ingan blue asmt-mba0 11.5 15.0 25.5 350 ingan cool white asmt-mwa0 43.0 60.0 73.0 350 ingan warm white asmt-mya0 43.0 50.0 73.0 350 ingan notes: 1. v is the total luminous fux output as measured with an integrating sphere at 25ms mono pulse condition. 2. flux tolerance is 10 % 3. v data are only applicable for asmt-mx00 component level device only.
2 package dimensions notes: 1. all dimensions in millimeters. 2. tolerance is 0.1mm unless otherwise specified. part numbering system asmt - m x a0 - n x 1 x x 3 0 color bin selection max flux bin selection min flux bin selection color r ? red a ? amber b - blue g - green w - cool white y - warm white
3 absolutefmaximumfratingsf [3] fatft a f=f25c parameter asmt-mxk0 units dc forward current [1] 350 ma peak pulsing current [2] 500 ma power dissipation for alingap 1050 mw power dissipation for ingan 1400 mw led junction temperature for alingap 120 c led junction temperature for ingan 110 c operating ambient temperature range -40 to +85 c storage temperature range -40 to +100 c note: 1. dc forward current C derate linearly based on figure 5 for alingap & figure 11 for ingan. 2. pulse condition duty factor = 10%, frequency = 1khz. 3. absolute maximum rating data are only applicable for asmt-mx00 component level device only. opticalfcharacteristics f[3] f(t a f=f25fc) partfnumber color peakfwavelength peak f(nm) dominantfwavelength d f [1] f(nm) viewingfangle 2 q ? [2] f(degrees) luminousfefciency (lm/w) typ. typ. typ. typ. asmt-mra0-agh00 red 635 625 120 42 asmt-mra0-ahj00 red 635 625 120 48 ASMT-MAA0-AGH00 amber 598 590 120 42 asmt-mga0 green 519 525 120 48 asmt-mba0 blue 460 467 120 12 partfnumber color correlatedfcolorftemperature, cctf(kelvin) viewingfanglef f 2 q ?f [2] f(degrees) luminousffefciencyf (lm/w) min. max. typ typ asmt-mwa0 cool white 4000 10000 110 48 asmt-mya0 warm white 2600 4000 110 40 notes: 1. the dominant wavelength, d , is derived from the cie chromaticity diagram and represents the color of the device. 2. q ? is the of-axis angle where the luminous intensity is ? the peak intensity. 3. optical characteristics data are only applicable for asmt-mx00 component level device only. electricalfcharacteristicf [2] f(t a f=f25c) diceftype forwardfvoltage v f f(volts)f@fi f f=f350ma reversefvoltage v r f(volts) thermalfresistance r q j-b f( c/w)f [1] min. typ max. max. typ. alingap 2.0 2.4 3.0 5 12 ingan 3.2 3.6 4.0 5 18 note: 1. r q j-b is thermal resistance from led junction to mcpcb. 2. electrical characteristic data are only applicable for asmt-mx00 component level device only.
4 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 380 430 480 530 580 630 680 730 780 wavelength - nm relative intensity 0 50 100 150 200 250 300 350 400 450 500 0.00 0.50 1.00 1.50 2.00 2.50 3.00 forward voltage - v forward current - ma 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 50 100 150 200 250 300 350 400 450 500 mono pulse current - ma relative luminous flux (v) - lm 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 -90 -70 -50 -30 -10 10 30 50 70 90 off-axis angle - relative intensity 0 50 100 150 200 250 300 350 400 0 10 20 30 40 50 60 70 80 90 t a - ambient temperature - c i f - max forward current - ma 0 0.5 1 1.5 2 -40 -25 -10 5 20 35 50 65 80 95 110 junction temperature - c relative lop (normaized at 25c) red amber r ja = 30c/w r ja = 50c/w red amber figuref4.ffradiationfpatternfforfallngap figuref3.frelativefluminousffluxfvs.fmonofpulsefcurrentfforfallngap figuref5.fmaximumfforwardfcurrentfvs.fambientftemperaturefforfallngap f deratedfbasedfonft j maxf=f110c,fr q ja f=f30c/wf/f40c/wfandf50c/w note: all parametric charts are only applicable for asmt-mx00 component level device only. figuref1.frelativefintensityfvs.fwavelengthfforfallngap figuref2.fforwardfcurrentfvsfforwardfvoltagefforfallngap figuref6.fdominantfwavelengthfvs.fforwardfcurrentfCfallngapfdevices
5 figuref10.ffradiationfpatternfforfingan figuref9.frelativefluminousffluxfvs.fmonofpulsefcurrentfforfingan figuref11.fmaximumfforwardfcurrentfvs.fambientftemperaturefforfingan f deratedfbasedfonft j maxf=f110c,fr q ja f=f30c/wf/f40c/wfandf50c/w note: all parametric charts are only applicable for asmt-mx00 component level device only. figuref7.frelativefintensityfvs.fwavelengthfforfingan figuref8.fforwardfcurrentfvsfforwardfvoltagefforfingan figuref12.fdominantfwavelengthfvs.fforwardfcurrentfCfinganfdevices 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 50 100 150 200 250 300 350 400 450 500 mono pulse current - ma ? v - relative luminous flux - lm 0 50 100 150 200 250 300 350 400 0 10 20 30 40 50 60 70 80 90 t a - ambient temperature - c i f - max forward current - ma r? ja = 50c/w r? ja = 40c/w r? ja = 30c/w 0 50 100 150 200 250 300 350 400 450 500 0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 forward voltage - v forward current - ma 450 460 470 480 490 500 510 520 530 540 100 150 200 250 300 350 400 forward current - ma dominant wavelength - nm green blue 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 380 430 480 530 580 630 680 730 780 wavelength - nm relative intensity green blue cool white warm white 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 -90 -70 -50 -30 -10 10 30 50 70 90 off-axis angle () relative intensity green blue cool white warm white
6 figuref13.ffchromaticityfshiftfvs.fcurrentf *note: (x,y) values @ 350ma reference to (0.0) figuref14.ftemperaturefvs.frelativefforwardfvoltagefshift figuref15.frelativeflopfvs.fjunctionftemperaturefforfingan flux bin limit [1] (for reference only) [x 1 x 2 ] bin fluxf(lm)ffatf350ma min max a 5.5 7.0 b 7.0 9.0 c 9.0 11.5 d 11.5 15.0 e 15.0 19.5 f 19.5 25.5 g 25.5 33.0 h 33.0 43.0 j 43.0 56.0 k 56.0 73.0 tolerance for each bin limits is 10 % note: flux bin limit is only applicable for asmt-mx00 component level device only color bin limits amber min.f(nm) max.f(nm) a 582.0 584.5 b 584.5 587.0 c 587.0 589.5 d 589.5 592.0 e 592.0 594.5 blue min.f(nm) max.f(nm) a 460.0 465.0 b 465.0 470.0 c 470.0 475.0 d 475.0 480.0 green min.f(nm) max.f(nm) a 515.0 520.0 b 520.0 525.0 c 525.0 530.0 d 530.0 535.0 0 0.002 0.004 0.006 0.008 0.010 0.012 0.014 0.016 0 0.001 0.002 0.003 0.004 0.005 0.006 0.007 0.008 x coordinates y coordinates 100ma -300 -250 -200 -150 -100 -50 0 50 100 150 200 250 300 -40 -15 10 35 60 85 temperature - c relative forward voltage shift (mv) 250ma 150ma 350ma 300ma 0 0.5 1 1.5 2 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 junction temperature (c) relative lop (%) normalized at 25c green blue cool white warm white
7 color bin selections [x 3 ] individual reel will contain parts from one full bin only. coolfwhite 0 fullfdistribution a a only b b only c c only d d only e e only f f only g g only h h only z a and b only y b and c only w c and d only v d and e only u e and f only t f and g only s g and h only q a, b and c only p b, c and d only n c, d and e only m d, e and f only l e, f and g only k f, g and h only j special color bin 1 a, b, c and d only 2 e, f, g and h only 3 b, c, d and e only 4 c, d, e and f only 5 a, b, c, d and e only 6 b, c, d, e, and f only warmfwhite 0 fullfdistribution a a only b b only c c only d d only e e only f f only z a and b only y b and c only w c and d only v d and e only u e and f only q a, b and c only p b, c and d only n c, d and e only m d, e and f only j special color bin 1 a, b, c and d only 2 e, f, g and h only 3 b, c, d and e only 4 c, d, e and f only 5 a, b, c, d and e only 6 b, c, d, e, and f only
8 coolfwhitef colorflimitsf [1] chromaticityfcoordinates bin a x y 0.367 0.400 0.362 0.372 0.329 0.345 0.329 0.369 bin b x y 0.362 0.372 0.356 0.330 0.329 0.302 0.329 0.345 bin c x y 0.329 0.369 0.329 0.345 0.305 0.322 0.301 0.342 bin d x y 0.329 0.345 0.329 0.302 0.311 0.285 0.305 0.322 bin e x y 0.303 0.333 0.307 0.311 0.283 0.284 0.274 0.301 bin f x y 0.307 0.311 0.311 0.285 0.290 0.265 0.283 0.284 bin g x y 0.388 0.417 0.379 0.383 0.362 0.372 0.367 0.400 bin h x y 0.379 0.383 0.369 0.343 0.356 0.330 0.362 0.372 tolerances 0.01 note: 1. color limit and color binning chart are only applicable for asmt-mx00 component level device only warmfwhite colorflimits f[1] (chromaticityfcoordinates) bin a x y 0.452 0.434 0.488 0.447 0.470 0.414 0.438 0.403 bin b x y 0.438 0.403 0.470 0.414 0.452 0.384 0.424 0.376 bin c x y 0.407 0.393 0.418 0.422 0.452 0.434 0.438 0.403 bin d x y 0.395 0.362 0.407 0.393 0.438 0.403 0.424 0.376 bin e x y 0.381 0.377 0.387 0.404 0.418 0.422 0.407 0.393 bin f x y 0.373 0.349 0.381 0.377 0.407 0.393 0.395 0.362 tolerances 0.01 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 x - coordinate y - coordinate b c e d a f 4.5k 5.6k 7k 10k 4.0k g h 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 0.52 x - coordinate y - coordinate b c e black body curve d a f 3.0k 3.5k 4.0k 2.6k black body curve
9 sub-color binning (only applicable for color bin a to bin d and bin g to bin h) coolfwhite colorflimitsf(chromaticityfcoordinates) bin a1 x y 0.364 0.383 0.367 0.400 0.348 0.385 0.347 0.372 bin a2 x y 0.364 0.383 0.362 0.372 0.346 0.359 0.347 0.372 bin a3 x y 0.329 0.357 0.329 0.369 0.348 0.385 0.347 0.372 bin a4 x y 0.329 0.345 0.329 0.357 0.347 0.372 0.346 0.359 bin b1 x y 0.362 0.372 0.360 0.357 0.344 0.344 0.346 0.359 bin b2 x y 0.360 0.357 0.358 0.343 0.343 0.331 0.344 0.344 bin b3 x y 0.358 0.343 0.356 0.330 0.341 0.314 0.343 0.331 bin b4 x y 0.329 0.331 0.329 0.345 0.346 0.359 0.344 0.344 bin b5 x y 0.329 0.331 0.344 0.344 0.343 0.331 0.329 0.320 bin b6 x y 0.343 0.331 0.341 0.314 0.329 0.302 0.329 0.320 bin c1 x y 0.329 0.369 0.329 0.357 0.315 0.344 0.314 0.355 bin c2 x y 0.329 0.357 0.329 0.345 0.316 0.333 0.315 0.344 bin c3 x y 0.314 0.355 0.315 0.344 0.303 0.333 0.301 0.342 bin c4 x y 0.315 0.344 0.316 0.333 0.305 0.322 0.303 0.333 coolfwhite colorflimitsf(chromaticityfcoordinates) bin d1 x y 0.329 0.345 0.329 0.331 0.317 0.320 0.316 0.333 bin d2 x y 0.329 0.331 0.329 0.320 0.318 0.310 0.317 0.320 bin d3 x y 0.329 0.320 0.329 0.302 0.320 0.293 0.318 0.310 bin d4 x y 0.316 0.333 0.317 0.320 0.307 0.311 0.305 0.322 bin d5 x y 0.317 0.320 0.318 0.310 0.309 0.300 0.307 0.311 bin d6 x y 0.318 0.310 0.320 0.293 0.311 0.285 0.309 0.300 bin g1 x y 0.392 0.421 0.386 0.400 0.364 0.383 0.367 0.400 bin g2 x y 0.386 0.400 0.382 0.385 0.362 0.372 0.364 0.383 bin h1 x y 0.382 0.385 0.378 0.370 0.360 0.357 0.362 0.372 bin h2 x y 0.378 0.370 0.375 0.358 0.358 0.343 0.360 0.357 bin h3 x y 0.375 0.358 0.371 0.344 0.356 0.330 0.358 0.343 tolerances 0.01 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 x - coordinate y - coordinate black body curve 4.5k 5.6k 7k 10k 4.0k a1 a2 a3 a4 b1 b2 b3 b4 b5 b6 c1 c2 c3 c4 d1 d2 d3 d4 d5 d6 g1 g2 h1 h2 h3
disclaimer: avagos products and software are not specifically designed, manufactured or authorized for sale as parts, components or assemblies for the planning, construction, maintenance or direct operation of a nuclear facility or for use in medical devices or appli - cations. customer is solely responsible, and waives all rights to make claims against avago or its suppliers, for all loss, damage, expense or liability in connection with such use. package tray dimensions handling precaution the encapsulation material of the product is made of silicone for better reliability of the product. as silicone is a soft material, please do not press on the silicone or poke a sharp object onto the silicone. these might damage the product and cause premature failure. during assembly or handling, the unit should be held on the body (white plastic). for product information and a complete list of distributors, please go to our web site: www.avagotech.com avago, avago technologies, and the a logo are trademarks of avago technologies in the united states and other countries. data subject to change. copyright ? 2005-2009 avago technologies. all rights reserved. av02-0341en - april 1, 2009
|
